Advertisement
Advertisement
Table of Contents
Related Manuals for TRAP-IT ABD-075
Summary of Contents for TRAP-IT ABD-075
- Page 1 Laser Beam Dumps Operation Manual Caution: Always Wear Laser Protective Eyewear...
- Page 2 For applications that range outside product specifications, occur to the product finish. we recommend that users expand the beam size with a 2. Position the laser beam centerline within the TRAP-IT™ negative lens to lower the power density level. target center.
- Page 3 WARRANTY laser beam. • Verify that the absorbing target surface hasn’t been damaged Kentek warrants TRAP-IT™ products to be free from defects by the laser. caused by faulty material or poor workmanship. Liability • Clean with ethanol, IPA, or acetone.
- Page 4 1. For applications using an external chiller laser damage threshold ratings can increase up to 500 watts/cm2 based on settings, call us to discuss! 2. Accessories for select beam dumps. 3. Pulsed laser damage threshold rating; 1J/cm2 for nanosecond pulses, 10J/cm2 for microsecond or millisecond pulses. 4. Product stand not included. TRAP-IT® BEAM DUMP AND TARGET TRAP-IT® BEAM DUMP AND TARGET...
- Page 5 Rev. 08/20 kenteklaserstore.com ©Kentek Corporation. All rights reserved. TRAP-IT™ is a registered trademark of Kentek Corporation.
Need help?
Do you have a question about the ABD-075 and is the answer not in the manual?
Questions and answers