Do you have a question about the P22 and is the answer not in the manual?
Questions and answers
Rodman Charles
April 28, 2025
My watch quit responding in the sleep mode, even though it worked fine when new. Is there a reboot capability?
2 comments:
Chuck
April 29, 2025
@Rodman Charles
Mr. Anderson
May 15, 2025
Yes, the Popglory P22 watch can be rebooted by letting the battery die and then recharging it, which may resolve issues such as being stuck in upgrade mode or sleep mode inaccuracies.
This answer is automatically generated
Michael
May 20, 2025
What is the accuracy of the blood pressure monitor
1 comments:
Mr. Anderson
May 24, 2025
The accuracy of the Popglory P22 blood pressure monitor is questionable. One user noted it might under-read and suggested calibrating it against a medically approved device. Another review described the readings as debatable and suitable only for general trend tracking, not precise measurements.
This answer is automatically generated
Blanche
April 4, 2025
How can I reset the correct date on popglory app
1 comments:
Mr. Anderson
April 4, 2025
The context does not provide specific instructions on how to reset the date on the Popglory P22 app. However, typically for smartwatches like the Popglory P22, the date and time are automatically synced with your mobile phone once the watch is connected to the app. To reset the date, ensure your phone has the correct date and time set, then connect the watch to the app to sync.
This answer is automatically generated
Johanna Fitzgerald Lynch
February 21, 2025
How do I set the weather
1 comments:
Mr. Anderson
May 14, 2025
To set the weather on the Popglory P22, you must:
1. Download and install the "Hero Band" app on your phone. 2. Turn on your phone’s GPS. 3. Allow the app to access your phone’s location. 4. Connect the smartwatch to the app.
Once connected with location permissions enabled, the weather data, including current temperature and forecast, will be available on the watch.
This answer is automatically generated
Linda
February 4, 2025
My phone is hooked up to the charger as usual but it is not charging. Not getting a green message "charging" either. What is wrong.
1 comments:
Mr. Anderson
February 10, 2025
If your Popglory P22 smartwatch is not charging and not displaying a "charging" message, possible issues could include:
1. Faulty Charging Cable – Ensure the USB charging cable is not damaged and is properly connected. 2. Dirty or Misaligned Magnetic Contacts – Clean the charging contacts on both the watch and charger and ensure they align correctly. 3. Power Source Issue – Try using a different USB adapter or power outlet. 4. Battery Depletion – If the battery is completely drained, leave it connected for a while before turning it on. 5. Defective Charger – Test with another compatible charger to check if the issue is with the charger itself. 6. Software Issue – Restart the smartwatch to see if it responds. 7. Hardware Failure – If none of the above solutions work, the battery or charging port may be defective and need professional repair or replacement.
This answer is automatically generated
Jodie grayless
February 3, 2025
I can not get watch turned on. tried everything but no luck
1 comments:
Mr. Anderson
February 10, 2025
Press and hold the side button for three seconds to power on the Popglory P22 watch.
This answer is automatically generated
Ralph E. Plummer III
January 28, 2025
how is the date/time set?
1 comments:
Mr. Anderson
May 14, 2025
The date and time on the Popglory P22 smartwatch are set automatically to match the time of the connected phone.
Appearance Introduction Full Touch Screen (The user can use the touchscreen to react to what is displayed.) Side Button (Press and hold the side button for three seconds to power on/off.) Charging contacts Green light sensor...
(included), a USB adapter on a flat surface. 2, Please place the P22 watch magnetic charging cable on the back of the P22 Watch. Make sure the charging contacts correctly attach to the back of the watch by magnetic force.
Functions Introduction Home screen: Shows date, time, steps, calories, etc. View exercise data: Tap "EXERCISE", choose one physical training, the watch shows exercise time, heart rate, calories, etc. You can end or pause the current exercise mode by tapping the two icons in the upper right corner. Heart rate: Tap “HR”...
Page 5
Steps: Record the current steps, calories, time and distance. Sleep data: Wear the watch to fall asleep, and P22 Watch can track your sleep. After waking up, tap the "Sleep" icon to learn how long you slept and check your sleep trends for the past 7 days in the app HeroBandⅢ.
Page 6
Check weather conditions: Check the current temperature and weather conditions of the day, as well as tomorrow’s weather forecast. NOTE: This function requires to connect the APP, and turn on the GPS of the phone, allow the APP to have the permission to obtain the location of the phone.
Music control: You can play/pause music when paired with your phone. You must open the phone player before you use the feature. Timer: Tap “Timer” on the screen to use the stopwatch function. Swipe left to exit the function. App Installation The compatible App is HeroBandⅢ.
Open the App to set personal information Switch to the [device] page and click [bind device] Click on [P22] in the list of devices scanned Bind completed Note: When the phone is connected to the watch, it needs to keep the Bluetooth of the phone on. Make sure there is no other matching device in the Bluetooth of the phone.
App Instructions 1. Enter the App and pull down on the main page to update the data.
Page 10
2. Click the steps, sleep and other functional modules, view current or recent exercise and sleep data.
Page 11
3. Click the exercise/heart rate/blood pressure modules to check current or recent data. You can also measure the heart rate and blood pressure in the app. The test data will be automatically saved in the app.
Page 12
Attention 1. Use the matching charging cable for charging. 2. This product is an electronic monitoring product, which can not be used as medical treatment. The data is for reference only. 3. Don't wear this device when bathing or swimming. FAQS Q: How to connect with mobile phone? 1.Download HeroBandIII then turn on bluetooth of your...
Page 13
2.In order to make the measurement results accurate, it is recommended that you measure blood pressure after wearing for 3-5min. 3.Please fill in your personal physical information correctly, which will make the step counting function more accurate. Q: How to change the time? The time of watch will keeps the same as the time of phone.
Page 14
Because your phone may automatically clear programs running in the background, which will cause the above functions to be unavailable and no notifications will be received. For more information, please contact us by e-mail: info@Popglory.top Our formal website: www.Popglory.top...
Need help?
Do you have a question about the P22 and is the answer not in the manual?
Questions and answers
My watch quit responding in the sleep mode, even though it worked fine when new. Is there a reboot capability?
@Rodman Charles
Yes, the Popglory P22 watch can be rebooted by letting the battery die and then recharging it, which may resolve issues such as being stuck in upgrade mode or sleep mode inaccuracies.
This answer is automatically generated
What is the accuracy of the blood pressure monitor
The accuracy of the Popglory P22 blood pressure monitor is questionable. One user noted it might under-read and suggested calibrating it against a medically approved device. Another review described the readings as debatable and suitable only for general trend tracking, not precise measurements.
This answer is automatically generated
How can I reset the correct date on popglory app
The context does not provide specific instructions on how to reset the date on the Popglory P22 app. However, typically for smartwatches like the Popglory P22, the date and time are automatically synced with your mobile phone once the watch is connected to the app. To reset the date, ensure your phone has the correct date and time set, then connect the watch to the app to sync.
This answer is automatically generated
How do I set the weather
To set the weather on the Popglory P22, you must:
1. Download and install the "Hero Band" app on your phone.
2. Turn on your phone’s GPS.
3. Allow the app to access your phone’s location.
4. Connect the smartwatch to the app.
Once connected with location permissions enabled, the weather data, including current temperature and forecast, will be available on the watch.
This answer is automatically generated
My phone is hooked up to the charger as usual but it is not charging. Not getting a green message "charging" either. What is wrong.
If your Popglory P22 smartwatch is not charging and not displaying a "charging" message, possible issues could include:
1. Faulty Charging Cable – Ensure the USB charging cable is not damaged and is properly connected.
2. Dirty or Misaligned Magnetic Contacts – Clean the charging contacts on both the watch and charger and ensure they align correctly.
3. Power Source Issue – Try using a different USB adapter or power outlet.
4. Battery Depletion – If the battery is completely drained, leave it connected for a while before turning it on.
5. Defective Charger – Test with another compatible charger to check if the issue is with the charger itself.
6. Software Issue – Restart the smartwatch to see if it responds.
7. Hardware Failure – If none of the above solutions work, the battery or charging port may be defective and need professional repair or replacement.
This answer is automatically generated
I can not get watch turned on. tried everything but no luck
Press and hold the side button for three seconds to power on the Popglory P22 watch.
This answer is automatically generated
how is the date/time set?
The date and time on the Popglory P22 smartwatch are set automatically to match the time of the connected phone.
This answer is automatically generated