Advertisement
Instruction manual KettenMax Premium
1. Preparation
Turn off the engine, select neutral and jack up the bike on the centre stand or paddock stand.
2a. Set up
Measure the chain width with template, select the correct brushes according to the template colour and put them
into the KettenMax (bottom box).
2b. Set up
Assemble the top and bottom box over the chain at an easy accessible point and lock with the rubber band.
Then screw the drain bag onto the KettenMax (bottom box).
Advertisement
Table of Contents
Related Manuals for KettenMax Premium
Summary of Contents for KettenMax Premium
- Page 1 Measure the chain width with template, select the correct brushes according to the template colour and put them into the KettenMax (bottom box). 2b. Set up Assemble the top and bottom box over the chain at an easy accessible point and lock with the rubber band. Then screw the drain bag onto the KettenMax (bottom box).
- Page 2 Attach the screw cap with nozzle to the bottle of cleaner, then using the hoses and Y-distributor, connect it to the KettenMax unit. Always connect the hoses to the upper (chain ingoing side) and bottom nozzle connection of the KettenMax. With change of rotation direction, reverse the upper hose.
- Page 3 KettenMax. Let the chain dry for about 3 to 5 minutes. Put the lubricating adaptor on the upper nozzle connection on the KettenMax (chain outgoing side). Spray in the lubricant in steps. Rotate the rear wheel slowly (2 x chain runs per minute). The lubricant accurately coats...
Need help?
Do you have a question about the Premium and is the answer not in the manual?
Questions and answers