Advertisement
5.
Press the main button (big button on the front side) once, and light comes on the
LCD window. [picture 7]
6.
Press the main button again. [picture 2]
7.
The cooling fan and the laser begin to operate, and treatment starts.
8.
When a set time passes, the product comes to a stop automatically. If you want
to stop in the middle of radiation, press the main button again.
9.
Some models for professional use have their focus unfixed; minute rotation left or
right of the beam outlet can achieve fine adjustment of the focus. Be sure to
handle it carefully as any forcible movement may cause damage to the laser.
Any damage resulting from the forcible handling of the laser will be attributable to
user's carelessness. [picture 8]
The following content describes the functions of the product. General users are advised
to read it through but not try to change settings. If any re-settings are necessary, be
sure to familiarize the directions and instructions beforehand.
◈ Opening and closing of cap: Open the cap on the reverse side [picture 3] and insert
two AA batteries with the negative poles facing inside. [picture 4] Pull the cap of the
laser outlet forward to open it. [picture 5] Press the main button softly, and output and
battery display appears on the LCD window. [picture 7]
<picture 3>
<picture 5>
< picture 7>
<picture 4>
< picture 6>
< picture 8>
4
Advertisement
