Related Manuals for Body Go YK-R1901
Summary of Contents for Body Go YK-R1901
- Page 1 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions.
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. -
Page 3: Exploded Diagram
EXPLODED DIAGRAM... - Page 5 Hardware:...
- Page 6 Parts List Description Description Bolt M8*42*15*S6 Rail Transportation Wheel Limiter Washer d8*Φ16*1.5 Bolt M6*16*φ10 Nylon nut M8*H7.5*S13 Rail upper cover Rail lower cover End cap Φ60.5*17 Rear supporter Front bottom tube Nut M8 Bolt M8*16*S14 Adjustable foot pad φ52*18 Seat Bolt M8*73*20*H5 U baffle plate Arc washer d8*Φ20*2*R30...
- Page 7 Bushing Φ32*3.3*Φ28*16*Φ14 Volute Spring Computer post Outer PC Board Knob Φ14*81.5*M8*S6 Outer Cover for Mesh Belt Wheel Bolt M6*55*15*S10 Sensor Washer d10 Sensor holder Bolt M5*20 Pulley Φ45*35 Washer d5*Φ16*1.5 Fixing Axle for Mesh Belt Tension knob Wave washer d10 93L/R Belt Front cover...
- Page 8 Step 1： Take out the bolts(9), arc washers(10), spring washers(11) and cap nuts(12) from main frame(27) by wrench(B), then attach front bottom tube(6) to main frame(27) with bolts(9), arc washers(10), spring washers(11) and cap nuts(12) by wrench(B).
- Page 9 Step 2： a. Take out bolts(31) from rail(33) by wrench(B); b. Insert seat(40) into rail(33); c. Secure rail piece(32) in the rail(33) with bolt(31) by wrench(B); d. Secure limiter(34) in the rail(33) with bolts(35) by wrench(B).
- Page 10 Step 3： a. Secure rail upper and lower cover(36&37) on the rail(33) with screws(25) by wrench(B); b. Secure rear supporter(38) on the bottom of rail(33) with washers(3), spring washers(11) and bolts(24) by spanner(A).
- Page 11 Step 4： a. Take out arc washers(10), spring washers(11) and bolts(24) from main frame(27) by spanner(A);Take out screws(25) from main frame(27) and cover(26L/R) by wrench(B); b. Attach rail(33) into main frame(27), then secure them with arc washers(10), spring washers(11) and bolts(24) by spanner(A); c.
- Page 12 Step 5： a. Take out spring washers(11), bolts(22) and washers(23) from main frame(27) by wrench(B); b. Secure pedal plate(30) to main frame(27) with spring washers(11), bolts(22) and washers(23) by wrench(B); c. Secure pedal(29) in the pedal plate(30) with bolts(24) by spanner(A); Attention: The pedal strap(28) should be put in the long groove which is at the bottom of pedal(29), and the pedal(29) must not press the pedal strap(28), so that the pedal strap(29) could be free to pull up and down.
- Page 13 Step 6： a. Pull out the trunk wire(16a/16b) from computer post(67), then connect them with computer wires(15a/15b), then put these wires into the computer post(67) by return; b. Secure computer(15) on the computer post(67) with bolts(15) by wrench(B) ;...
- Page 14 ADJUSTMENTS GUIDE 1.MOVING THE MACHINE To move the machine, lift up the Rear supporter (38) until the transportation wheels on the Front bottom tube(6) touch the ground. With the wheels on the ground, you can transport the bike to the desired location with ease. 2.PEDAL ADJUSTMENT The pedal strap is adjustable and can be personalized to fit the user’s foot size.
-
Page 15: Display Information
YK-R1901 EXERCISE MONITOR INSTRUCTION DISPLAY INFORMATION FUNCTION DESCRIPTION TIME The time of each workout ,when starting exercise. TIEM/500m Average time per 500 meters. DISTANCE The distances of each workout ,when starting exercise. PULSE(Optional) Heart beat . CALORIE The calorie burned of each workout, when starting exercise.
Need help?
Do you have a question about the YK-R1901 and is the answer not in the manual?
Questions and answers