Page 1
TECHBOOK HEAT PUMP A new way to regulate the water of your spa plug and play solution benefit from energy savings a total flexibility that can also cool down water...
Safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISMANTLE THE UNIT. THERE ARE NO USER SERVICEABLE PART INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Warnings WARNINGS: Before installing or connecting the unit, please read the following * DO NOT DISASSEMBLE OR ALTER THE APPARATUS * DO NOT USE FOAM TO ISOLATE THE UNIT * TURN POWER OFF BEFORE MODIFYING ANY CABLE CONNECTION IN THIS UNIT * TURN POWER OFF BEFORE CLEANING OR SERVICING THIS UNIT * PRODUCT MUST BE DISPOSED OF SEPARATELY FROM NORMAL HOUSEHOLD IN ACCORDANCE WITH LOCAL WASTE DISPOSAL LEGISLATION...
Page 5
Introduction This document This document includes the necessary information to safely install and maintain your Heat pump. Please read this manual carefully before you operate the unit. The Heat pump The Heat pump is one of the most economical ways of heating your spa efficiently Using the free renewable energy from the air, it is over 4/5 time more efficient than traditional heating.
Connections Turn off power before connecting the Heat pump to the spa control system. System connection The communication cable provided with the heat pump must be connected to the RS485 communication port of the spa control. RS485 port (P83) Control system Terminal box The terminal box is located behind the terminal cover and allows access to the communication and power connections Heat Pump...
Installation CAUTION Do not install the unit in a place where flammable gas leak can occur. All plumbing connections should be carried out as per the instructions in this manual. Failure to do so could result in water damage to property. Avoid contact with the fan when the unit is operating as this will cause serious injury.
Page 9
Installation Precautions • Avoid locating the unit close to bedrooms or other noise sensitive areas. • Avoid a location which could create vibration (e.g. secured to a solid wall). • The fan should not blow towards windows, walls or spaces likely to be inhabited by people or animals. •...
Operating modes The operating mode can be changed through the spa user interface. Six different operating modes are available: 1) Eco Heat (EcoH) 2) Smart Heat (HEAT) 3) Cool (COOL) 4) Eco Auto (AUTO) 5) Smart Auto (SMRT) 6) Electric (ELEC) Eco Heat (EcoH) Eco Auto (AUTO) In this mode, the Heat pump is used as the unique source...
Maintenance To protect the paintwork, avoid leaning or putting objects on the shell. Heat pump parts can be wiped with a damp cloth and domestic cleaner. (Warning: Never use cleaning agents containing sand, soda, acid or chloride as these can damage the surfaces.) To prevent clogging in the titanium heat exchanger, ensure that the system incorporates a water and filter treatment equipment.
Steps to winterize your Heat pump • Turn off all electrical power to the Heat pump. • Turn off the circulation pump. • Disconnect the water piping inlet and outlet from the Heat pump. • Remove the drain plug and make sure the heat exchanger drains out. •...