Advertisement
Quick Links
PTS E-Kit™ User Guide for
AN/PRC-150 E-Kit™
Table of Contents:
1. E-Kit™ Major Items List
2. PSDS Overview & Parts List
3. Power Source Part List
4. Antenna System VHF/UHF Parts List
5. Antenna System HF Parts List
6. HF Antenna Setup
7. Interconnection Diagrams
8. Concept of Operations & Best Practices
9. Maintenance, Warranty & Contact Information
Failure to follow all instructions and guidance provided in E-Kit™ system manuals
may result in system failure and/or personnel injury. It is highly recommended
for all personnel to review all instructions and warnings when employing E-Kit™
systems and components prior to operations.
For additional guidance in setup and operations, please reference the full manuals
contained within the kit.
Rev 1.1
www.pts-inc.com | info@pts-inc.com | 256-539-6787 | 1318-B Putman Drive Huntsville, AL 35816
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Pts E-Kit AN-150
Summary of Contents for Pts E-Kit AN-150
- Page 1 E-Kit™ systems and components prior to operations. For additional guidance in setup and operations, please reference the full manuals contained within the kit. Rev 1.1 www.pts-inc.com | info@pts-inc.com | 256-539-6787 | 1318-B Putman Drive Huntsville, AL 35816...
- Page 2 Parts List / Major End Items E-Kit™ PART NUMBER DESCRIPTION ITEM # PER KIT AS0150-HR-150 Harris 160 Single AC/DC Power Supply Docking Station w/ Manual Antenna - HF Dipole 150W Expeditionary Broadband (2-30 MHz) ANT-WWS-000101-2-1 ANT-RTL-307005-1-1 Antenna - IAM D - 7m 3" (Dual Band: 30-88 & 225-512 MHz) - Multicam ACC-RTL-002105 Secondary Collar - 3"...
- Page 3 Power Supply Docking Station (PSDS) PSDS Components AS0150-HR-150 (PSDS) 110V AC PWR Cable Audio Jumper – J3 AS0150-HR-150 PSDS for AN/PRC-117G Tactical Radio 2. 110V AC PWR Cable AS0150-HR-150 shown with unit supplied 3. Audio Jumper radio and accessories AS0150-HR-150 Rear Ports 120-240V AC PWR Input 24V DC PWR Input TOCNET Port, See manual...
- Page 4 Power Source & Solar Kit 2. CAB.DPW.101H 1. PWR-BTR-00203 24V DC PWR Source with AC PWR Cable Connected 3. CAB.APW.101 6. PWR.BTR.12001 4. CAB.APW.102 Power Source Components PWR-BTR-00203, 24VDC Power Source CAB.DPW.101S, SINCGARS Straight Power Source to PSDS CAB.APW.101, 110V AC PWR Cable CAB.APW.102, Solar Input Cable (Deluxe Kit Only) CAB.APW.102E, Solar Input Cable Extension (Deluxe Kit Only) 5.
- Page 5 Antenna System – VHF/UHF 2. Top Collar 3. Secondary Collar 1. ANT-RTL-307005-1-1 4. Base Cap 5. VHF Connection Cable 6. UHF Connection Cable 7. Guy Ropes 8. Guy Wire Stakes (Rock Pegs) ANT-RTL-307005-1-1 Antenna Components Antenna System ANT-RTL-307005-1-1 7m 3” VHF/UHF Integrated Shown Bagged Antenna Mast System Top Collar...
- Page 6 Antenna System – HF 1. Balun 2. RF Load 3. Antenna Half 4. Tie Downs 5. Hoist Rope 6. Antenna Feedline 7. Radial Set ANT-WWS-000101-2-1 Antenna Components Balun (150W AVG, Type N Female Connector) Antenna System RF Load Shown Bagged Antenna Half Tie Downs Hoist Rope with Throw Weight...
- Page 7 HF Antenna Setup The 7m Integrated Mast Antenna system (IAM-D, pn. ANT-RTL-307005-1) provides an excellent mounting solutions to deploying the E-Kit included HF antenna system. This combination of antenna systems provide a multiband antenna field that is both quickly erected and has a small footprint. Both antenna systems must be installed using the user provided instruction manuals.
- Page 8 E-Kit™ Interconnect Diagram Power Source connected to optional solar panels (Note: Power Source can support up to 3 solar panels) Power Supply connected to PSDS 24V DC Inputs. (Shown with CAB.DPW.101H connected) Typical field setup for Field Operations TOC Area Power Source &...
- Page 9 PTS E-Kit™ Concept of Operations & Best Practices The PTS Expeditionary Kit (E-Kit™) for Tactical Radios is a self-contained ancillary kit that supports tactical communications in a light-weight, easily usable package. The E-Kit™ contains the following: 1. Power Supply Docking Station (PSDS) that mounts the radios and supplies regulated power and audio outputs;...
-
Page 10: Maintenance Information
The PTS PSDS warranty shall be for a period of thirty-six (36) months from the date of the receipt by the user. Products sold by but not manufactured by PTS will be covered by the Original Equipment Manufacturers (OEM) warranty policies and procedures.
Need help?
Do you have a question about the E-Kit AN-150 and is the answer not in the manual?
Questions and answers