Table of Contents
Advertisement
20. If the FPV Camera is not
connected to the flight
controller, connect the FPV
camera to the power source
plug
21. Gather Battery Bracket
22. Using skilled fingers or small
pliers, CAREFULLY install
the Battery Bracket on the
underside of the airframe,
inserting the tabs on the inner
two mounting tabs.
23. If the fitment is too tight,
lightly file/trim the lower
edges of the FPV bracket
and/or file/trim the airframe
mount slot.
24. Cross Check and Verify all
that components are properly
placed and are tight.
25. Verify that Motors and
Propellers are tight and in
correct rotation.
26. Verify that the FPV Camera is
snapped into its mount.
INSTALLATION (CONT.)
35
+
Advertisement
Table of Contents
