Bind Flight Controller And Transmitter - M1 Drones M1 STEM Drone Series User Manual

Carefully insert each motor into the
corresponding motor mount (CW &
CCW), until they reach the stopper,
ensuring no wires are pinched or
damaged during insertion.
1. Once inserted, route the wires
outward through the motor
mount slot.
2. Carefully straighten wire.
3. Next, very gently twist motor
wire ends until they are neatly
twisted. There
approximately 5-7, 360° twists.
4. Wrap the motor wire ONCE up
and around the airframe arm,
leaving the
underneath the frame.
5. Set airframe aside.

BIND FLIGHT CONTROLLER AND TRANSMITTER

1. Gather Flight Controller (FC)
2. Gather Radio Transmitter (Tx)
3. Ensure AA Batteries have been
put into Radio Transmitter (Tx)
should be
connector
27