Advertisement
STEP 6 FOR 12FT
The number of triangle-rings sewn on the mat is equal to the number of holes in the frame. lf you
notice that you have miscounted a hole or triangle-ring, remove and reinstall the springs as necessary
while maintaining an even distribution of tension as explained above.
Please count carefully in the following steps. If you attach a spring incorrectly you can damage the
mat.
WARNING
Heavy gloves must be used to protect your hands from pinch points assembly and goggles
must be worn to avoid injuries to the eyes.
2nd
1st
3rd
4th
FIGURE 1
1
#13
4
#15
Select two holes in the middle of the
top rail as starting point.
For even distribution of spring tension
and ease of assembly, the springs
must always be installed on opposite
sides of the frame in an alternating
manner, i. g. 1
rd
th
3
and 4
18
st
nd
and 2
, followed by
as shown in FIGURE 1 .
Advertisement
