Installation Instructions - Fisher & Paykel CMO24SS3Y Installation Manual

Hide thumbs Also See for CMO24SS3Y:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION INSTRUCTIONS

UNPACKING AND EXAMINING YOUR MICROWAVE OVEN
Remove all packing materials from inside the microwave oven
cavity; however, DO NOT REMOVE THE WAVEGUIDE COVER,
which is located on the top cavity wall. Read enclosures and
SAVE this manual.
Check the microwave oven for any damage, such as misaligned
or bent door, damaged door seals and sealing surfaces,
broken or loose door hinges and latches and dents inside the
cavity or on the door. If there is any damage, do not operate
the microwave oven and contact your dealer or FISHER AND
PAYKEL AUTHORIZED SERVICER.
CHOOSING A LOCATION FOR YOUR MICROWAVE OVEN
You will use your oven frequently so plan its
location for ease of use. Allow at least 2 inches on
the sides, top and at the rear of the oven for air
circulation.
Your microwave oven can be built into a cabinet or
wall by itself or above wall oven models WOSU-30
or OB30SDEPX1 (Fisher & Paykel), using the
appropriate Fisher & Paykel branded Microwave
Accessory Trim Kit (CMOTTK). It cannot be built in
above conventional gas or electric range or any
other wall oven.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmo-24ss

Table of Contents