AMERICANA OUTDOORS CHEROKEE Installation Instructions Manual

Advertisement

Quick Links

Before You Begin:
• Consult your local building department for any required permits
You may be required to obtain a building permit for this structure. Contact your local building
department for details.
• Read instructions thoroughly
Please read all instructions and notes carefully prior to assembly. Americana is not responsible
for replacing parts lost or damaged due to incorrect assembly.
• Check for all parts
Use the Parts and Hardware List to identify all parts. To prevent scratching of painted materials,
place on a tarp or other protective material.
• Prepare surrounding area
Remove any obstructions around shelter location. Shelter installation should be scheduled after
all concrete and masonry work in the surrounding area is completed.
• Assistance is required during entire assembly.
CAUTION
Proper site preparation is required.
Standard shade structure design does not include additional loads such as hanging heavy plants,
swings, or other objects.
DO NOT stand or sit on the shade structure roof.
Repair or replace broken parts immediately.
This kit contains parts with metal edges. Please be careful when handling.
Americana Outdoors, Inc.
CHEROKEE SHELTER
INSTALLATION INSTRUCTIONS
1
Contact us at:
1-800-851-0865 or
www.americana.com
Cherokee Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHEROKEE and is the answer not in the manual?

Questions and answers

Summary of Contents for AMERICANA OUTDOORS CHEROKEE

  • Page 1 • DO NOT stand or sit on the shade structure roof. • Repair or replace broken parts immediately. • This kit contains parts with metal edges. Please be careful when handling. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 2: Tools Needed For Installation

    If this is not done, the metal shavings will rust and stain the surface finish. • It is recommended to lower the speed of electric drills during this installation. Installing Tek screws at a high RPM may cause the Tek screws to become damaged or break during installation. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 3: Care And Maintenance

    Central Standard Time, Monday - Friday. Refer to the provided manufacturer’s drawing for details and special notes. Americana will not be responsible for delays or lost installation time due to failure to follow all instructions. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 4: Parts List

    Part Code: 11517 Part Code: 11139 Roof Panel W Style Corner Cap Cover Plate Aluminum Part Code: 10307 Part Code: 60048 Galvalume Part Code: 30106 Base Cap Scupper Peak Cap Part Code: 60063 Part Code: 90241 Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 5: Hardware List

    OPTIONAL Parts 18” Wide Standing Cupola (shown with Cupola Flashing Ridge Cap Flashing Seam Panel optional louvers) Part Code: 30120 Wood Roof V Flashing Drip Edge Flashing Wood Roof C Cap SS Panel C Cap Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 6 OPTIONAL Parts (continued) 8” Wide Standing SS Panel Clip Gutter Strap Seam Panel Part Code: 20836 Part Code: 10214 #10 x 1” Screw #14 x 2-3/4” Screw Part Code: 20650 Part Code: 20663 Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 7 Fill footing with concrete and allow to completely harden before continuing installation. If installing posts surface mounted, set post/rafter assembly over anchor bolts. Attach the anchor bolt nuts and washers, but DO NOT completely tighten at this time. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 8 Attach the ridge beam using (2) 1/2” x 7-1/2” hex bolts (CC) and 1/2” hex nuts (DD) at each connection. To attach ridge cap (C), position centered over ridge beam (J). Attach using #12 x 1-1/4” screws (BB) at 12” on center. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 9 (BB) at 8” on center. Continue attaching roof panels as shown in Step 7. Attach gutter (D) to roof panels (F) using (2) #8 x 1/2” screws (AA) at 8” on center. Continue installation with Step 8. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 10 Be sure to leave equal overhang on both ends. Attach the gutter using (3) #12 x 1-1/4” screws (BB) at each connection. Repeat for opposite side. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 11 Attach the panel to ridge cap (C) and gutter (D) using #8 x 1/2” screws (AA) at 8” on center, (1) at each valley of the panel. Also attach the ribs of the panel to gutter (D) using #8 x 1/2” screws (AA). Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 12: Front View

    STEP 8 Attach projection fascia (E) at the opposite end of the shelter as shown in Step 5. Repeat Steps 5 - 8 to install remaining roof section. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 13 Use a template to achieve a good finish and minimize over-spray. • Be sure to sweep or brush all metal shavings off the shelter and leave the shelter in a clean condition to help prevent the rusting or staining of the surface finish. Americana Outdoors, Inc. Cherokee Installation Guide...
  • Page 14: Warranty

    Warranty What the Warranty Covers: Americana Outdoors, Inc (Americana) warrants its products that have been installed in accordance with the installation guidelines, under normal usage conditions, and with proper maintenance as follows: Twenty-five (25) year limited warranty on steel against material failure and defects. Ten (10) year warranty against peeling, cracking, blistering, or crazing of the surface finish of aluminum and steel components.

Table of Contents