Advertisement
6. And you are ready to automate your framing!
System controls
1. Open ASCOM settings, click Advanced
2. On the right side you have 2 sections. Heater and System. We are currently interested in
System, which contains 4 buttons:
a. Reboot FR1 – resets the unit
b. Firmware version – currently installed firmware vesion (in case you have ASCOM
connectivity issues, click this button)
INDI (Linux)
In Linux, you can control our flap panel with Deep Sky Dad FR1 INDI driver.
Basic usage
Select correct ttyUSB device (e.g. ttyUSB0) and click connect. Below is print screen of main tab after
rotator is connected:
7
Advertisement
