Advertisement
Dimensions
Installation
M48 x 0.75mm thread is available on each side. Orientate rotator with motor towards the
telescope/focuser. Attach the camera on the side without the motor.
FAQ
Basics
What kind of power adapter can I use?
We recommend 12V DC power adapter, as the units are fine tuned to this specific voltage. However,
autofocuser will work up to 14V. Socket specification: tip positive, 5.5mm x 2.1mm. Should you not
have 12V adapter at hand, the units also work in range from 12V-14V without issues. Current output
of the power adapter should be about 1A, but can be more (it will not damage the flap).
3
Advertisement
