Advertisement
Quick Links
Advertisement
Related Manuals for IHOS D Series
Summary of Contents for IHOS D Series
- Page 2 Important Safety Precautions & Explanation of Symbols The lightning flash with arrowhead symbol within an equilateral triangle is The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous” voltage intended to alert the user to the presence of uninsulated “dangerous”...
- Page 3 INTRODUCTION Please read the following directions and obtain the best results. Key features: channels - XLR input connectors - Speakon output connectors - Each channel has independent Clip Limiter - St ereo and Parallel modes of operations - Reliability - Complete amplifier protection CONTROLS, CONNECTORS &...
-
Page 4: Xlr Inputs
Output Voltage Peak Limiter(VPL) Voltage Peak Limiter (VPL) is a unique feature in D series amplifiers. It is used to select the maximum power available on each output channel. The VPL allows you to set the correct output power for the connected speakers to get to its best performance. -
Page 5: Gain Controls
GAIN CONTROLS Turn the Gain controls clockwise to increase Gain and counterclockwise to decrease Gain. LED INDICATORS Displays The LED displays for each channel operate as follows: POWER Green Main power supply active on this channel. Clip LED on Shows activity of Limiting circuit, which responds to both clipping and to thermal CLIP Yellow... -
Page 6: Specifications
SPECIFICATIONS D1000 D2004 ohms Stereo Power 2X490W 4X400W ohms Stereo Power 2X810W 4X640W Input connetor XLR female Input impedance 20k ohms balanced Input Sensitivity 0.77V Input CMRR >80dB Output connector Speakon Hum&Noise >112dB Damping Factor >1000 @ 8 ohms <0.1% (20Hz-20kHz 1W) Frequency Response 20HzЈ34KHz,(+0/-0.3dB, 1W/8ohms) Level control...