NWI LSC60 Manual page 9

(2) Press to activate laser and aim
at the point which is to be measured.
(3) Press again to take the first
measurement, and again to take the
second and third measurement.
(4) The height of building, first,
second and third distance value will be
seen on display.
Note:
(1) The device will automatically determine the longer distance as
triangle's hypotenuse, and shorter distance as right-angle side.
(2) When measuring right-angle side (Distance 2 in Figure F), user
should ensure laser beam is right-angled to the target line.
(3) User can press to delete any measured length and then press
to re-measure.
Tilt Measurement
Press to activate tilt sensor, the symbol
Press to record the tilt on display, and take a distance measurement.
Note:
The tilt sensor measures inclination between ± 180°.
Laser Site Calculator LSC60 Laser Site Calculator LSC60
The accuracy of tilt sensor is 0.1°.
The device cannot measure from the left or right side.
Figure (F)
Auto Horizontal Measurement
Press
measure tilt and hypotenuse distance, results of tilt, distance of
hypotenuse and two right-angle sides will be seen on display. Refer to
Figure (G).
Auto Height Measurement
appears on display.
Press
button to measure distance to the top and to the bottom of the object,
distance of two hypotenuse, and height of object will be seen on
display. Refer to Figure (H).
6 6
Figure (G)
twice, the symbol appears on display. Press
Figure (H)
third times, the symbol appears on display. Press
EN
to
LSC60