Page 1
Hanover Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. 1‐800‐416‐3511 Please call our Toll‐Free Customer Service Hotline at: Between 9:00 AM and 5:00 PM Eastern Time, Monday through Friday www.hanover‐products.com Or visit our website at: To expedite any future warranty claims, please retain the Instruction Sheet, Warranty Card and receipt for future use. For additional on‐line support on assembly, troubleshooting and care & maintenance of your outdoor furniture, please visit our website at: www.hanover‐products.com. 6/1/2015 (a) ...
Page 2
ASSEMBLY INSTRUCTIONS Position the swivel base on a flat, solid surface. Make sure the swivel plate is positioned all the way into the base. It may have vibrated out during shipment. The two sets of holes in the swivel plate should be facing away from you.
PARTS IDENTIFICATION LIST * NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE PARTS LIST DESCRIPTION ORDER PART # AB1267 CHAIR FRAME SWIVEL ASSEMBLY AB1268 & BASE 5/16" X 43 MM HW0450 BOLT Ø 8.0 X 2.3 MM HW0003 SPRING WASHER METAL PLATE HW0686...
Page 4
ASSEMBLY INSTRUCTIONS Attach a leg to the leg connector bracket by carefully guiding the bolts already in place on the table legs (each leg has two bolts) through the holes in the leg connector bracket. Add a washer and a nut to the end of each bolt as shown in Fig 2 Hand tighten only 2-3 turns.
Page 5
PARTS IDENTIFICATION LIST * NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE PARTS LIST DESCRIPTION ORDER PART # AT72764 TABLE TOP LEG CONNECTOR AT72765 BRACKET AT72766 TABLE LEG 1/4" X 18 MM BOLT HW0035 1/4" NUT HW0014 Ø6.5 X 1.0 MM HW0004 WASHER HW0105...