Une ZHERO Quick Installation Manual
Single-phase series 3.0
Hide thumbs
Also See for ZHERO:
- Manual (129 pages) ,
- Quick installation manual (9 pages) ,
- Quick installation manual (7 pages)
Related Manuals for Une ZHERO
Summary of Contents for Une ZHERO
- Page 1 ZHERO QUICK INSTALLATION GUIDE Single-phase series 3.0 UNE srl Via Modena, 48/E 42015 Correggio (RE) Italia Tel. +39 0522 693566 – info@unesrl.com – https://unesrl.com...
- Page 2 Carefully follow all the steps indicated in the ZHERO quick installation guide, at the end of the installation fill in the check boxes; the document must be delivered signed to the customer at the end of all the procedures described.
-
Page 3: Installation
ATTENTION: It is necessary to install a PV unloader (SPD), external to the machine, with Up index Up ≤ 2.5 kV. Figure 1 - MPPT inlet hatch 4. AC CONNECTION - A ZHERO TO MAINS DISTRIBUTOR/GENERATOR and "BACKUP" INSTALLATION Connection of the distributor / genset network entering the system (not production meter): ... -
Page 4: Internet Connection
ATTENTION: the wattmeter is a single-phase 230V device with a maximum current of 100A. ATTENTION: in the case of three-phase systems, each ZHERO system must have its own wattmeter. ATTENTION: use twisted cables; do not use Cross cables. Connection of AC to the wattmeter... -
Page 5: Check Connections
7. ZHERO ASSOCIATION WITH WEBSERVER The installer will have to request, if not already registered with his own account, his registration directly to UNE email: assistenza@unesrl.com that will provide him with a username and password; by accessing the portal: https: \\ portal.zherosystem.com you can enter the code "WEB Activation: xxxxxx"... - Page 6 To verify the correct functioning of ZHERO use the UneSrlCommunication software. The USB type B port for ZHERO monitoring is located in the upper left part, under the main panel, as indicated in the Figure 6. The UneSrlCommunication software and the relative instruction manual with le legend of each alarm "Manual - UneSrlCommunication"...
- Page 7 BATT1 (depending on whether you have 1 or 2 batteries) and check that the data is regularly updated: BATT0 BATT1 Figura 11 - Battery alarms detail UNE srl Via Modena, 48/E 42015 Correggio (RE) Italia Tel. +39 0522 693566 – info@unesrl.com – https://unesrl.com...
- Page 8 Try a system restart by turning the system off and then on again after 30 seconds. UNE will not deal with such operations and will not consider requests for assistance regarding this issue until all of the following activities have been carried out.