Page 1
OHP WIFI DEVICE - INSTALLATION GUIDE There are two ways to use and connect the OHP OBD2 WiFi device to your vehicle, one is to connect it via desktop/laptop/tablet Windows computer and the other one is via iPhone/Android phone. Below are the steps on how to install the device: I - Via Desktop/Laptop/Tablet Windows Computers 1.
Page 2
3. Download the FORScan software here: https://forscan.org/download.html. Then install it on your computer. 4. Open the FORScan software. 5. Go to Settings and select WiFi under the Connection tab. Make sure to check the Auto-connect box.
Page 4
II - V ia iPhones and Android Phones 1. Plug the device into your OBDII port. 2. Open Phone settings, check for new Wifi networks, then connect to WiFi OBDII network.
Page 5
3. Download and install the FORScan Lite phone app. Download the app at Google Play Store for Android users and at the App Store for iOS users.
Page 7
5. Using the FORScan Lite phone app, push connect to the vehicle.
Page 8
6. All set. You are good to go. *Note: You C ANNOT apply configurations, programming functions, and some service procedures using FORScan Lite. Use the FORScan software instead using Windows laptop, desktop computer, or tablet if you wish to do so.