Nedlands Group UGR16-30W-60SQ Quick Manual

LED Light Panel
UGR16-30W-60SQ, UGR16-30W-120/30
Installation Instructions:
T his installation must be carried out by an electrician. Please read these instructions carefully
before installation. Leave a copy for the user/maintenance engineer for future reference.
Safety:
This is a mains powered product. Before installation, maintenance or cleaning please ensures
the power supply is isolated.
Maintenance:
a. Please ensure the fitting has cooled down prior to performing maintenance on this
product.
b. If the product is not damaged in transport, it is supplied ready to use.
c. Clean using a dry cloth. No detergent or water to be used.
Notes:
Voltage input: AC220-240V/50/60Hz, using the newest high efficiency constant current driver.
Anti-electromagnetic interference, no mercury, no lead. Before using, please confirm that
this product has not been damaged during transit.
Please keep packing material and small accessories far away from children. Avoid the eyes
sighting the LED light-emitting area directly.
Please keep products and packing away the open fire or high temperature goods.
The fixture must not be modified. And modification will void the warranty and can make the
product dangerous.
Please note the recommended clearance from the rear heat sink to any flammable materials is
0.2m. Under no circumstance should any insulation or similar be laid onto the fitting.
Application:
Hotel, meeting room, factory or office, residence or public facilities, commercial use, school,
hospital and other environments.
LED panel light for indoor using only.
VIC Office Unit 1 / 181 Proximity Drive, Sunshine West VIC 3020 WA Office Unit 3 / 5 Edison Circuit, Forrestdale, WA, 6112
A&K Investments (Australia) Pty Ltd T/A Nedlands Group ABN 95 164 389 762
Free Call 1800 909 306
nedlandsgroup.com.au
Website
Email sales@nedlandsgroup.com.au