Advertisement
Quick Links
Advertisement
Related Manuals for Reactor Reactor
Summary of Contents for Reactor Reactor
- Page 1 Instructions & Warranty...
- Page 2 We are very proud of what we have accomplished and we are excited to welcome you to our ever-growing family. While your REACTOR watch is built for maximum durability, it should ALWAYS be rinsed thoroughly after use in salt water. www.reactorwatch.com...
- Page 3 IMPORTANT! Every analog REACTOR watch is fitted with a screw-down crown to ensure maximum water resistance. However, using your watch in water with the crown unscrewed or only partially screwed down will result in leakage. ALWAYS CHECK THAT THE CROWN IS...
- Page 4 Time/Date Watches � � � Always screw down crown after setting www.reactorwatch.com...
- Page 5 1. Unscrew crown and pull to pos. 2. 2. Turn to set date to yesterday’s yesterday’s date. 3. Pull crown out to pos. 3. 4. Turn crown clockwise until date changes to today. The watch is now in AM mode. To set a PM time, advance time past 12 o’clock, then set time.
- Page 6 Time/Day/Date Watches � � � Always screw down crown after setting www.reactorwatch.com...
- Page 7 1. Unscrew crown and pull to pos. 2. 2. Turn clockwise to set to yesterday’s yesterday’s day name, then turn counter- clockwise to set to yesterday’s yesterday’s date. 3. Pull crown out to pos. 3. 4. Turn crown clockwise until day & date change to today.
- Page 8 Chronographs ���������� ���� � � � ����� Always screw down crown after setting www.reactorwatch.com...
- Page 9 1. Set date and time as described in the “Time/Date Watch” section. 2. The Chrono stopwatch uses the large second hand and the “eye” at 9 o’clock to track elapsed time. Start and/or stop the chrono by pressing the Start/Stop button. Reset to zero by pressing the Reset button.
- Page 10 Chronographs cont’d ���������� � � Always screw down crown after setting www.reactorwatch.com...
- Page 11 If your chronograph does not reset to 12 o’clock, or if you wish to have it reset to another time, perform the following: 1. If needed, stop and reset the chrono. 2. Unscrew crown and pull to pos. 3. 3. Press the Start/Stop button repeatedly until the desired zero point is reached.
-
Page 12: Rotating Bezel
Rotating Bezel If your REACTOR watch is equipped with a rotating bezel, it can be used to measure elapsed time. Rotate the bezel counter-clockwise until the zero mark is aligned with the minute hand of the watch. As the minute hand moves, you will easily be able to track elapsed time. - Page 13 Band Adjustment & Care If your REACTOR watch is equipped with a metal band, the clasp is adjustable for minor sizing changes. Depress the spring pin in the clasp with a small object and move the pin to a different hole.
-
Page 14: Warranty
Warranty Our warranty is simple and straight forward: if anything goes wrong with your REACTOR watch in the first two years of ownership, we will either repair or replace it at our expense. Here’s the “not so small print”: Broken crystals, dead batteries, abuse,... - Page 15 Service If your watch needs service, return it to: Reactor Service 5312 Derry Ave., Suite B Agoura Hills, CA 91301 Include a note explaining the problem, a copy of your sales receipt, phone number, e-mail address, and return mailing address. Our service center is committed to returning your watch in 7-10 working days.
- Page 16 REACTOR Watches Agoura Hills, CA 800-291-6600 www.reactorwatch.com...
Need help?
Do you have a question about the Reactor and is the answer not in the manual?
Questions and answers