Advertisement
1 Switch printer off.
3 Locate the hopper
cap on your
cartridge.
Hidden behind the
label.
5 WARNING: You must ensure all toner is
dumped from your cartridge before refilling with
the new toner.
Important - mixing new and old toner will cause
print defects to occur.
6 Shake your bottle
of new toner
vigorously for 30
seconds BEFORE
removing the cap.
Remove the cap and
seal from the bottle
8 Insert the spout
into the hole. The
toner will flow out
like water, so take
care not to spill it.
10 Replace the cap
in your toner
cartridge, using the
new cap provided.
www.zinetic.co.uk
Toner that doesn't cost the earth
Printed on recycled paper, using refilled cartridges
2 Remove drum and cartridge from printer.
Separate the cartridge from the drum unit. Store
drum unit out of direct light.
Place printer cartridge on several sheets of
newspaper.
4 Remove the
hopper cap using
needle nose pliers,
or a flat blade
screwdriver to lever
out the hopper cap.
Do not worry if you
damage the cap as
a new cap is
provided. Do not
damage the
cartridge.
Empty in an area
that can tolerate a
toner spill i.e. your
garage.
Toner can be very
messy - empty the
old toner directly
into a large bin bag.
7 Fit the toner
pouring spout
securely to the
bottle.
Spouts are
reuseable.
9. With the spout
inserted –
carefully "Upend"
the cartridge and
allow the toner to
slowly pour into the
cartridge.
11 Gently rock the cartridge from side to side to
distribute the toner in the cartridge.
Wipe away any excess toner from around the plug.
Reset the gear as below.
email:
sales@zinetic.co.uk
Advertisement
