Related Manuals for MYTORQ MYCS-ID50
Summary of Contents for MYTORQ MYCS-ID50
- Page 1 OPERATION MANUAL FOR CHARGE STATION MYCS-ID50 MYCS-ID50-E ANLIDAR INDUSTRIAL CO., LTD. http://www.anlidar.com Y2F154-8E-001...
- Page 2 Icon Explanation Read manual Caution Double insulation Indoor use only No humidity No fire No disassemble No disposal CE Certification ETL Certification Caution Please read all instructions carefully before operate the rechargeable battery and charger. Also please follow all the instructions and pay attention to all the warring. Important Notification Please operate under the correct voltage to the charger in according with the operation manual.
- Page 3 Kilews. Do not apply different type or brand of battery on this charger, otherwise may cause error or danger. 2. Please match the charger with the battery models MYCS-ID50/MYCS-ID50-E. 3. The use of other than genuine Anlidar replacement parts or battery may result in decreased tool performance and increased maintenance, and may invalidate all warranties.
- Page 4 2. Current protection 3. Shortage protection (fuse implement) 4. Battery reverse current protection 5. MYCS-ID50/MYCS-ID50-E Built-in ID recognition feature protection 6. Temperature protection Temperature protection detail explanation (1) When the battery temperature is between 0-10℃, the charger will use low current to pre-charge the battery until the battery temperature higher than 10℃...
- Page 5 Specification Charger Station Model MYCS-ID50 MYCS-ID50-E Battery Identification 100V – 240V Input Voltage Output Voltage 12.6VDC Output Current Dimension W ＊ L ＊ H 145mm＊115mm＊93mm 145mm＊115mm＊80mm Weight 0.5(Kg) Battery Type Li-ion Applicable Battery Models Charging Time Battery Capacity SKC-LB1025S Prox. 40min...
Need help?
Do you have a question about the MYCS-ID50 and is the answer not in the manual?
Questions and answers