Advertisement
4.2 Intelligent configuration settings
Temperature
temperature threshold, comparison mode, alarm setting, etc
Mask detection setting:voice alarm of mask detection
Face recognition: including the use of snapshot, snapshot sensitivity setting,
snapshot control time, snapshot minimum pixel, snapshot application scenarios,
snapshot modes, peripheral area expansion of snapshot pictures and upload
Settings;
Temperature measurement items introduction(Default recommend
Temperature measurement items
1.Superposition temperature information defaults superposition is to enable the temperature
display on the device screen
2. The temperature unit is Fahrenheit or Celsius. The default value of the Celsius temperature
threshold is 35.6 ℃ -37.2 ℃.The Fahrenheit temperature threshold can be set to the default
value of 96.1 ° F-99.0 ° F. Customers can adjust their own needs accordingly.
Alarm sound can be associated with voice prompts: abnormal body temperature, forbidden /
normal temperature, please pass
3. Temperature compensation is an adjustment towards the error in actual body temperature or
equipment display temperature.
Mask detection item introduction (default recommended)
Three alarm types for mask detection:
1.No mask alarm : when a person is detected without a mask, voice prompts "Please wear a
mask";
2.Mask alarm: when a person is detected with a mask, voice prompts " Do not block the face";
3.No alarm: there is no voice prompt to wear a mask or not;
No mask alarm is enabled by default
www.olexla.com
info@olex.la
measurement
setting:temperature
Enable/Disable Picture as below:
Figure (function item)
measurement
setting,
)
ed
Figure (function item)
8
User Manual
Advertisement
