Related Manuals for Azoth Systems O'Dive ONE
Summary of Contents for Azoth Systems O'Dive ONE
- Page 1 O’Dive sensor Complete instruction manual Updated on 09/07/2020 Download of the O’Dive ONE or O’Dive TEK app is required https://www.o-dive.com...
-
Page 2: Warning
They are not intended to serve as a reference or to substitute professional medical advice based on the personal situation of the user. Azoth Systems disclaims any responsibility for actions taken by the user because of advice and information provided by the service. In particular, if the user has not consulted a medical doctor and does not have a medical certificate authorizing him to practice diving. -
Page 3: Table Of Contents
O’Dive instruction manual Updated on 09/07/2020 Table of contents WARNING ........................... 2 Direction of use .......................... 2 O’DIVE Perimeter and usage restriction ..................3 O’Dive ONE ..........................3 O’Dive TEK ..........................4 O’Dive ONE & TEK ........................4 Step-by-step guide for using O’Dive ................... 5 Step 1 –... -
Page 4: O'dive Tek
O’Dive instruction manual Updated on 09/07/2020 computer. The additional stops eventually performed by the diver are taken into consideration to evaluate their benefit on the exposure severity. Repetitive and multiple dives - i.e. with a surface interval below 12 hours – can be analysed (for example: cruise with several dive per day). -
Page 5: Step-By-Step Guide For Using O'dive
O’Dive instruction manual Updated on 09/07/2020 Step-by-step guide for using O’Dive Step 1 – Charging the sensor Before each use of the sensor, it is important to charge it in order to have the necessary autonomy to the realization of your measurements. IMPORTANT: It is strongly advised to make sure that the sensor is properly charging before leaving it on its charging base, in order to avoid discharging and deterioration of the battery. -
Page 6: Step 3 - Taking In Hand The Sensor
O’Dive instruction manual Updated on 09/07/2020 Step 3 – Taking in hand the sensor Starting the sensor To start the sensor, press for 1 second the button located on its top. The sensor vibrates and the LED will flash rapidly in blue (1 flash per second for 90 seconds) signaling the possibility of pairing a phone. - Page 7 O’Dive instruction manual Updated on 09/07/2020 Step 4 – Registering / Logging in Before using the sensor, you need to create an account on the app. Open the app and click on the button Register. If someone is already logged in, click on the name on the top right corner of the home page to join the section ‘My account’...
- Page 8 O’Dive instruction manual Updated on 09/07/2020 Before any measurement, make sure that your name is displayed on the top right corner of the screen. If it is not the case, click on the other name to join the section ‘My account’ and log in or register (see step 4).
-
Page 9: Step 6 - Validating And Synchronizing Measurements
For a manual input*, input your dive parameters and validate. *Reminder: Manual input of the dive parameters is reserved for square dives (see O’DIVE Perimeter and usage restriction). Only the O'Dive ONE sensor can process multilevel dives using an equivalent square profile approach for Air/Nitrox mixes. -
Page 10: Support - Contact
O’Dive instruction manual Updated on 09/07/2020 A simulation tool is available to help you see the potential benefits of several factors on the quality of your decompression procedure. To use this tool, select the dive that you want to simulate and change one or several of the proposed factors to improve your procedure quality.
Need help?
Do you have a question about the O'Dive ONE and is the answer not in the manual?
Questions and answers