E-Banking Tech EB-300 Operating Manual page 11

2-①.
This key can be used to detect different-denomination note by vertical-size sensor.
2-②
This key can be used to activate auto-counting or manual-counting.
2-③
It is the SPEED key which has 4 different speeds. Whenever you press this key, it will be
forwarding as shown under.
1000-1200-1300-1500
1000: 1,000 notes/ minute 1200: 1,200 notes/ minute
1,300: 1,300 notes/ minute 1,500: 1,500 notes/ minute
You can change the counting speed under DEN off mode only.
2-④
When press ADD key, the accumulated total of notes will be shown on the screen when they have
been counted. By pressing CLEAR/BACK key user can clear the counted value.
2-⑤
When press BAT key, you can activate batch number, which is already registered (default: 100).
Or if you want to select a special batch number, please use number key
When the counted number reaches at the batch number, the machine will stop automatically.
2-⑥
By pressing MODE key, you can enter the setting menu.
2-⑦
After counting - By pressing RESET/START key, you can clear counted number.
11