Page 2
Important Safety Information Always be careful when using the machine. To reduce the risk of fire, electrical shock, and other injuries, keep these safety considerations in mind when installing, using, and maintaining your machine: Stability. Place the machine on a secure, stable surface. The machine can be seriously damaged if it falls.
Page 3
unsafe areas. Covers, guards and interlock switches are provided to ensure that the machine will not operate with covers opened. 9. Avoid direct viewing of the image sensor lights. The lamps are bright and, while not harmful, they may cause an annoying afterimage. Always keep the rear cover closed during operation and storage.
Table of Contents Part 1 Description of the Parts ---------------------------------------------------------- 5 Part 2 Classification of models ---------------------------------------------------------- Part 3 Function of Control Panel ---------------------------------------------------------- 7~12 Part 4 Overview of Display ---------------------------------------------------------- 13 Part 5 Operating ---------------------------------------------------------- 14 Placing Bills onto the Hopper Counting Selecting Add Function Selecting Batch Function...
1. Description of the Parts The name of the Parts note Guide for counting Note Expansion Guide Hopper Thickness Adjustment Screw Gap Control screw Stacker Handle Connector for external display Power Switch Power Plug...
3. Function of Control Panel (EB-300UV, EB-300MG, EB-310, EB-310S, EB-310SU) ① : UV DETECTION ON / OFF ② : MG DETECTION ON / OFF ③ : DIFFERENT-DENOMINATION DETECTION ON / OFF ④ : ACCUMULATED NUMBER COUNT ⑤ : PRESET NUMBER OF NOTES ⑥...
Page 8
2-①. This key can be used to detect counterfeit note by UV sensor. When counterfeit note or suspected notes were detected while counting, some of specific message or error messages are displayed on the screen.. 2-② This key can be used to detect counterfeit note by MG sensor. When counterfeit note or suspected notes were detected while counting, some of specific message or error messages are displayed on the screen..
Page 9
2-⑦ After counting - By pressing RESET/START key, you can clear counted number. On the other condition - RESET/START key performs reset the machine or manual start on manual counting mode. 2-⑧ By pressing 9 (DOWN) key, you can input “9” or move to the next line in setting mode. 2-⑨...
Page 10
(EB-300) ① : DIFFERENT-DENOMINATION DETECTION ON / OFF ② : AUTO COUNTING / MANUAL COUNTING ③ : COUNTING SPEED ④ : ACCUMULATED NUMBER COUNT ⑤ : PRESET NUMBER OF NOTES ⑥ : ONLY FOR SETTING MENU ⑦ : CLEAR THE COUNTED NUMBER or MANUAL START KEY : DOWN OR NUMBER “9”...
Page 11
2-①. This key can be used to detect different-denomination note by vertical-size sensor. 2-② This key can be used to activate auto-counting or manual-counting. 2-③ It is the SPEED key which has 4 different speeds. Whenever you press this key, it will be forwarding as shown under.
Page 12
On the other condition - RESET/START key performs reset the machine or manual start on manual counting mode. 2-⑧ By pressing 9 (DOWN) key, you can input “9” or move to the next line in setting mode. 2-⑨ By pressing 0 (UP) key, you can input “0” or move to the previous line in setting mode.
Overview of Display Batch number Counting number Counted number : number of notes (Max 4 digit) BATCH function : Display the batch number (Max 3 digit)
5. Operating Placing Bills onto the Hopper It is very important to place the bills onto the hopper correctly because recognition performance of the bills is highly affected by the arrangement of the bills. Please avoid counting bills in bad condition such as wet, excessively dirty, spoiled, folded, curled notes and with foreign material like clips, bands, etc.
L-1 : 1,200 notes /minute This menu is (default) L-2 : 1,300 notes /minute not work on to select L-3 : 1,500 notes /minute EB-300 L-4 : 1,800 notes /minute level Ed-A Double level setting : L-A : auto (default)
Page 16
Title Description Bu-A Buzzer level setting : On1: Beep sounds when error occurred On2: Beep sounds when error occurred and counting finished (default) Off: No beep St-A Stacker warning time setting : Passed note remains on the stacker after 30(default) seconds, machine notify to user by beep sound until remove it.
7. Error messages & Troubleshooting Error message Cause of error Solution Make the gap narrow by adjusting E_DB A duplicated note has been passed. the gap control screw. 2 or more notes have passed at the Make the gap narrow by adjusting E_CH same time.
8. Specifications Item Specification Dimension (W x D x H) 270[W] x 260[D] x 255[H] mm Weight 6 kgs Hopper capacity 300 pcs(extension Max 500 pcs) Stacker capacity 300 pcs Display Type Banknote Size Range W: 90 ~ 180, H: 50 ~ 100 Banknote thickness range 0.05 ~ 0.2mm Counting Speed...
Page 19
10. Product warranty Thank you for purchasing our product. If a failure occurs due to defects, Contact your dealer or product manufacturer to repair or compensate the product. All process about warranty is in accordance with our terms of warranty. <...