Canine Innovations Pet Convincer Pro User Manual

The Pet Convincer Pro User's Guide
Congratulations! You have purchased the
most comprehensive, pain free, humane and
safe pet training device ever created!
With proper use, your customer's pet
(dog/cat) will quickly learn what behaviors
are off limits.
As with any tool, the Pet Convincer Pro is
most effective when used correctly. Please
take a moment to read through this user's
guide so that you and your customer's pet
can get on the road to an enjoyable
relationship!
The Device.
There are three (3) major components to the
Pet Convincer Pro:
1. Head – trigger, nozzle, lock
2. Grip (also reusable Cartridge
insulator)
3. Cartridge (CO2; inside the Grip)
Getting Started:
IMPORTANT: You should get acquainted
with the Pet Convincer Pro BEFORE you
attempt to use it. Make sure that these
procedures are accomplished away from all
pets and children. Do not let children use
the Pet Convincer Pro. It is not a toy!
Loading the Device:
Threaded CO2 Cartridge: Grasp the Head
of the device with one hand and the CO2
Cartridge with the other.
a) Without depressing the trigger lever,
screw the bare Cartridge slowly into the
treads in the Head until the Cartridge begins
to contact the puncture pin.
b) Quickly continue screwing in the
Cartridge until hand tight (cannot be
turned/screwed in anymore by hand,
without excessively over tightening.
Also see NOTE below.) This
punctures (activates) and seals the
CO2 Cartridge to the Head. Place
the Grip over the Cartridge. You are
now ready to start "convincing" pets.
NOTE: You may hear a little "puff" as the
Cartridge is screwed on. No unwanted,
escaping CO2 leakage/hissing air occurs if
the Cartridge seals correctly to the Head.
Only when the Cartridge is empty, unscrew
the empty Cartridge, slip off the reusable
Grip/insulator and please recycle the steel
cylinder as locally appropriate. Retain the
Grip for use with a new Cartridge.
c) Safety Lock Feature: Using your
thumb, move the red safety lever lock to the
"up" position to lock the trigger lever.
Moving the red safety lever lock to the
"down "position unlocks the front CO2
trigger lever and ONLY then allows CO2 to
be dispensed by the Pet Convincer Pro.
(See images a & b)