Chapter 2: Product Overview; Front Panel - Cisco SR224G User Manual

Chapter 2:
Product Overvew

Front Panel

The LEDs and network ports are located on the front panel of the
Switch
LEDs
System (Green) This LED lights up and remains lit when the Switch is
powered on
1-24 (Green) Each LED lights up when a connection is made through its
corresponding port It flashes when the corresponding port is active
Ggabt/mnGBIC 1-2 (Green) The Gigabit/miniGBIC LED lights up
when a connection is made through the corresponding Gigabit port It
flashes when the corresponding port is active
Ports
1-24 These ports connect the Switch to network devices,
such as computers
Ggabt 1-2 The Gigabit RJ-45 ports support 10/100/1000
Mbps connections and are connection points for network
devices such as Gigabit servers Each Gigabit RJ-45 port is
paired with a miniGBIC port If a miniGBIC module is present,
the corresponding 10/100/1000 RJ-45 port will be disabled
MnGBIC 1-2 The two miniGBIC (Gigabit interface converter)
ports are connection points for miniGBIC modules, so the
Switch can uplink via fiber to another switch or two The
miniGBIC ports are compatible with the MGBSX1, MGBLH1,
and MGBT1 only
24-Port 10/100 + 2-Port Ggabt Swtch + 2 MnGBIC
Chapter 2: Product Overvew
Front Panel