Page 2
Thank you for buying this product O'jump. We advise you to read the assembly instructions carefully. The apparatus is presented in pre-assembled parts for a simplified assembly. We have designed this O'jump product to bring you complete satisfaction. If you need help, the O'jump team is at your disposal to accompany you.
Page 3
Tools needed to assemble the apparatus. Hex wrench N°18/19 Hardware listing (pre-assembled) M12 x 35 M12 x 45 Ø24x13 18/01/2021...
List of parts (pre-assembled) 1 Package 681/00 Pair of legs and feet Weight 10Kg Beam body according to model 1 package 681/10 Length 3m 37Kg 1 package 682/00 Length 5m 62Kg 18/01/2021...
Page 5
Hex wrench N °18/19 Assembling 1 Put the beam body upside down on the floor and put in place the leg Position the leg at 580 ± 5mm from the edge, then tighten the nuts Ref E 18/01/2021...
Page 6
Hex wrench N °18/19 Assembling 2 1) Repeat the operation on page 5 18/01/2021...