Advertisement
SPECIFICATIONS
STANDARD SPECIFICA TIONS
Scale Length .............................. 863.6mm
Body-Neck Construction ......... Bolt On
Length ........................................ 1145mm
Width ......................................... 361mm
Net Weight ................................ 3.8kg
COLOR
Body
RM ......................................... Red Metalic
SLB ........................................ Shelby Blue
VY .......................................... Vintsge Yellow
SOB ....................................... Sonic Blue
Neck
RM ......................................... Red Metalic
SLB ........................................ Shelby Blue
VY .......................................... Vintsge Yellow
SOB ....................................... Sonic Blue
BODY
Material ...................................... Alder
Body Depth ............................... 41mm
FINGERBOARD
Material ...................................... Rosewood
Fingerboard Width ................... 0-F 40.0 mm, 12-F 56.4 mm
No. of Frets ................................ 20
NECK
Material ...................................... Rose/Maple
Neck Thickness ........................ 1-F 21.0 mm, 12-F 24.4 mm
PAR TS
Hardware ................................... Chrome Plated
Nut .............................................. Urea
Bridge ........................................ Vintage Type: YP-02
Strings ........................................ K4030
CONTROLS
Volume ....................................... 15A 500KΩ x 1
Balance ...................................... 05A 250KΩ x 1
PICKUPS
Front/Rear ................................ Single Coil (Open Type)
Magnet
Front/Rear .............................. Ferrite
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly
other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes
to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling
food.
WARNING : CHEMICAL CONTENT NOTICE!
SBV500
5
Advertisement
