SprintRay Pro Quick Start Manual page 2

2
Where to Set Up
Situate your Pro 3D printer in a
well-ventilated area on a flat and level
surface. Keep it away from extreme
temperatures, windows, bright UV light
sources, and direct sunlight.
3
Plug in Your Pro
Use the provided power cable to plug your printer into
a surge protector or uninterrupted power supply.
Pro automatically goes to sleep to save energy after
a period of inactivity. Interaction with the touchscreen
or sending a print job will reactivate it.
Use the power switch if you need to perform a hard
reset or disconnect your Pro from its power source.
4
Connect to a Wireless Network
Using the touchscreen, follow these steps:
Settings > Wireless Network > Select a Network
Once connected to a wireless network, Pro will be discoverable by
SprintRay Desktop Software.
5
Print Platform
(Pre-installed)
To minimize cleanup,
always remove the
platform before removing
your resin tank.
6
Resin Tank
(Pre-installed)
Level Surface
Turn to lock/unlock.
Align resin tank with tank cradle,
place it, and slide it into the tracks.
Uneven Surface
UV Cover
USB Port
Touchscreen
Insert and lock.
Push away from you to lock it in
place. You will hear a "click" when
the resin tank is properly locked.
Warm Environment
Ethernet Port
Settings
Unlock and pull to remove.
Gently pull toward you to
unlock and then lift up to
remove the resin tank.
Power
Switch