Page 1
Training and Support In this brief guide, we’re going to show you how to set up Contact our team of support technicians and make your first model on the new SprintRay® Pro S with questions. Desktop 3D Printer. Please follow the instructions carefully and visit our Visit support.sprintray.com...
Page 2
When starting a print, the desktop software or touchscreen of covered by the limited warranty offered by SprintRay. your Pro S 3D printer will display the resin level necessary for the planned job. Fill the tank to the suggested level, ensuring even distribution of the resin across the tank.
Page 3
Prepare Print Platform (Pre-installed) Platform Heating SprintRay Pro S is equipped with a heated build platform Built-in Heater to improve printing reliability. The platform may be warm to the touch when this feature is enabled. Locking/Unlocking the Print Platform The SprintRay Pro S print platform uses magnetic locking.
Page 4
Reorder Consumables Software Updates To reorder consumables, including materials and resin tanks, contact your equipment dealer representative. SprintRay will periodically publishes software updates for the Pro S 3D printer. Ensure your printer is connected to internet to receive software updates.
Need help?
Do you have a question about the Pro S and is the answer not in the manual?
Questions and answers