Turn Your Tv On Or Off; Pairing Your Bluetooth Remote - Ozarks OzarksGo Remote Control User Manual

Table of Contents

Advertisement

Start With the Basics

Turn Your TV On or Off

Your installation technician programmed a remote to operate each television.
1. The upper left power button turns TV power on or off.
2. The upper right button turns Set Top Box (STB) power on or off.
It is not necessary to power the STB off when you are finished watching TV.
Note: If there have been no channel changes or guide button presses on a television for
24 hours, the set top box will automatically go into standby mode. To resume watching
TV, press SELECT as indicated on the floating screen prompt.

Pairing Your Bluetooth Remote

If your remote control does not pair immediately or has lost its pairing
1. Hold PLAY/PAUSE + 0 until feedback LED starts blinking
2. Feedback LED will stop blinking to confirm pairing
Note: If pairing is unsuccessful, hold OK/SELECT and MENU until LED blinks and press
digits 9 - 6 - 6, and repeat steps 1 and 2
Browse With Picture-In-Picture
See what else is showing without leaving your current program. OzarksGo
television service gives you the ability to flip through current programs and see
what is on without leaving the program you are watching with convenient Picture-In-
Picture browsing.
• Press the DOWN ARROW key to access ON NOW information.
• Press the LEFT ARROW key to see JUST MISSED.
• Press the RIGHT ARROW key to see WHAT IS ON NEXT.
View Recent Channels
OzarksGo television provides convenient access to recently viewed
channels and recordings.
• Press the UP ARROW key to access recent channels viewed with Picture-in-
Picture or Poster Art.
• Press LEFT or RIGHT ARROW keys to select a program, then press SELECT to
watch the program.
• Press the UP ARROW key again to view recent recordings.
Access and Navigate the On-screen Menus
OzarksGo television offers you more. The on-screen menus are easy to navigate
with your remote control.
• Use the LEFT and RIGHT ARROW keys to select items on any horizontal menu
that appears at the top of any OzarksGo television screen.
• Use the UP and DOWN ARROW keys to select items on any vertical menu that
appears when you highlight an item in the top menu navigation.
• Press SELECT to select your highlighted item.
• Press BACK/EXIT at any time to return to TV viewing.
1
www.ozarksgo.com
The Menu Button
The MENU button or LEFT ARROW key on your remote control will give you access
to all of the great features your OzarksGo television service has to offer, including
enhanced search, channel favorites, parental controls, On Demand and more.
Note: Step-by-step instructions on all of the features listed in this section can be found
throughout this guide.
1. Press the MENU button or LEFT ARROW key on your remote control.
The MAIN MENU screen appears.
2. Use the UP and DOWN ARROW keys to select a heading in the MAIN MENU.
• Select RECORDED TV to access all programs you have recorded with your
Whole-Home DVR service.
• Select On Demand to access the On Demand Free Connection, new releases
or movies that you have already rented.
• Select SETTINGS to customize your program guide, manage your parental
controls, set the viewing aspect ratio for your TV and more.
3. Press SELECT to open selected screens.
The Info Button
The INFO button gives you more information about current and future programming.
Press this button anytime you would like more information on a selected program.
You can also schedule a recording from any PROGRAM INFO screen.
Get Info About the Program You are Watching
1. Press the INFO button on your remote. The PROGRAM INFO screen appears with
a brief description of the program, including the run time.
2. Press the RIGHT ARROW key to access information on the cast and crew.
3. Press the DOWN ARROW key to record the program one time or to set up a
series recording. Press SELECT to select the desired action.
4. Press the EXIT button to return to the program you were watching.
Get Info About a Future Program
1. Press GUIDE on your remote.
2. Press the RIGHT ARROW key to highlight a program that is not currently on.
3. Press INFO to view details about the highlighted program and to schedule a
one-time or series recording.
Note: You can also get more information on any program in your results list when using the
search feature.
OzarksGo
2

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OzarksGo Remote Control and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF