Yamaha MT-09 Owner's Manual page 35

 To ensure that the desired settings
changes are saved, be sure to exit
each menu via the triangle mark (if
displayed). Exiting the settings
menu by pressing and holding the
wheel switch may not save set-
tings changes.
"Display Setting"
Display Setting
Lap Time OFF
Tacho Color OFF
This module allows you to switch the
lap time mode and tachometer color
mode ON/OFF.
When the lap time mode is selected,
the twin vehicle information displays
on the main screen will display a lap
timer and a lap counter. To exit the lap
time mode, the turn lap timer OFF in
the display setting module.
To change the tachometer to color
mode, select ON.
"Manual TCS Setting"
Manual TCS Setting
This module allows you to customize
the "TCS-MODE M" which is accessi-
ble on the main display using the
MODE switches.
km/h
TCS
This model uses a variable traction
control system. For each setting level,
the further the vehicle is leaned over,
the greater the amount of traction con-
trol (system intervention) is applied.
There are 3 setting levels available for
the "TCS-MODE M".
Instrument and control functions
TCS 1
SCS 1
LIF 1
km/h
5-14
Setting level 1 applies the least amount
of overall system intervention, while
setting level 3 applies the greatest
amount of overall traction control.
TIP
 TCS can only be turned on or off
via the main screen using the
MODE switches.
 SCS and LIF can be turned off in-
dependently of TCS for "TCS-
MODE M".
 When "TCS-MODE" has been set
to "OFF" on the main screen: TCS,
SCS and LIF are all turned off to-
gether.
SCS
SCS can be set to OFF, 1, 2, and 3.
OFF turns the slide control system off,
setting level 1 provides the least
amount of system intervention, and
setting level 3 provides the greatest
amount of system intervention.
LIF
LIF can be set to OFF, 1, 2, and 3.
5