Advertisement
7. Blood Pressure Testing
Press the touch button to switch to blood pressure interface and the
blood pressure icon will start to flash (please wait patiently on this
interface until the measurement results are displayed). The manual
measurement result on wristband will not be stored in APP. If you need
to save, please go to App terminal to perform manual test to turn on the
real-time blood pressure in real time. Real-time blood pressure
monitoring is performed once every 10 minutes by default and the
results will be saved and displayed on the App chart.
8. Heart Rate Testing
As switching to heart rate interface, the corresponding icon will flash (Be
sure to wear the wristband 1 CM behind the ulnar style process of wrist
ulna and make sure the sensor is firmly attached to your skin) until the
result is displayed. This single manual measurement will not be saved to
APP. If you turn on real-time heart rate from APP terminal, the wristband
Advertisement
