Summary of Contents for HaoZhiDa HZD1917S
- Page 2 USER MANUAL (HZD1917S) Be endless in advancing Be tolerant to diversity Please look up the instruction manual before using.
- Page 3 Basic Layout of Wristband Charging Description of Wristband Charge the wristband before use Charging Voltage:5V Charging Time: About 2 hours...
- Page 4 Wristband Interface and Function Description 1. Power ON/OFF Long press the contact button to turn power on/off 2. Time, data and period For first use, please connect it with APP on phone, so as to synchronize the correct time, data and period. 3.
- Page 5 to dynamic heart rate automatically. In this mode, shortly press the touch button to pause. To exit this tab, long press the pause icon After and menu is displayed, long press to continue or to exit. In this mode, you can view the current heart rate value, running distance, calories and running time.
- Page 6 7. Blood Pressure Testing Press the touch button to switch to blood pressure interface and the blood pressure icon will start to flash (please wait patiently on this interface until the measurement results are displayed). The manual measurement result on wristband will not be stored in APP. If you need to save, please go to App terminal to perform manual test to turn on the real-time blood pressure in real time.
- Page 7 will calculate the average every 30 minutes and save the data to the APP. 9. Sleeping Monitoring The wristband measures sleeping condition automatically by default, and you can view the historical sleeping data from App terminal. Bluetooth Matching 1. Turn on the wristband 2.
- Page 8 Bluetooth Disconnection 1. Disconnect the Bluetooth from App 2. Turn off the phone background operation 3. Ignore or delete the matched Bluetooth from Bluetooth screen in Phone Setting menu. APP Function and Interface Description 1. Installation After installation is finished, input the correct personal information as required and match it with wristband 2.
- Page 9 Heart Rate: (1) View the average heart rate throughout the dat. It can be automatically detected by the wristband and recorded once every 30 minutes. (2) You also can click the icon “ “ to test heart rate manually from APP Terminal. When the measured result is displayed, click the icon manually to stop.
- Page 10 the blood pressure data throughout the day from this interface. The blood pressure will be measured automatically once every 10 minutes. (2) Click the icon “ ” to perform single manual blood pressure test (Please remain still until the result is displayed). After the test is finished, you can select to save the result or not.
- Page 11 Running Mode 1. GPS exercise Click the start button to do exercise and allow get location. During the movement, you can view the track, time, speed, speed setting, and calories in real time. 2. Wristband exercise Click the start button, then the wristband will enter sport mode automatically , in which you can view the real-time heart rate, running time, calories and steps.
- Page 12 saved automatically in APP. Setting My device: Click the connecting device. The following functions can be set by clicking the connected device (a) Information remind: Select ON to enable each remind function (b) Clock setting: Set the clock time (c) Long-time setting remind: Set the remind time and interval (d) Heat rate alarm: Set the heart rate remind upper limit (e) Display illumination as turning wrist: Set display illumination function as raising hand...
- Page 13 reference level. (h) Switch setting: 1.Wearing test 2.Heart rate auto monitoring (real-time heart rate) 3.Blood pressure auto monitoring (real-time blood pressure) 4.Find phone. 5.Stop watch function (Once the stop watch function is turned on, the wristband will add one stop watch interface. Long press this interface to enter and short press this button to start or stop the stop watch function, the long press this button to exit.) Wristband Interface...
- Page 14 (j) Countdown: Set the countdown time and set to display it on wristband or not. (k) Reset password : The matching password of wristband can be reset to prevent other phones from pairing with the wristband (l) Screen style setting: There are 3 options (m) Firmware update : Update the wristband firmware (n) Clean data: Reset the wristband to factory setting Running target: Set every day running target...
- Page 15 pressure and real-time heart rata data. This is a normal phenomenon. If you want to turn it off, please turn off the wearing detection, automatic blood pressure and automatic heart rate in Switch Setting of APP. Parameters Main chip: Nordic N52832 Screen: 1.14’’...
- Page 16 FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.