Hussmann C5 Installation Manual

Procedure for Installing Lighted Shelves with Single-Prong Connector

Shelf lighting uses parallel
wiring. Please follow these
instructions to ensure
good contact between male
and female connectors.
SHUT OFF POWER TO CASE. REMOVE
ALL SHELVES.
Engage each power socket cap and ensure
that each cap is fully seated before cleaning.
.
R W
I R
O
G
H N
T G
Care and Cleaning Section 5 –
Maintenance
Keep liquid out of sockets.
"OFF."
Light Switch Location
It is important that shelf brackets be proper-
ly seated in the slotted upright.
Push in clip
Socket with Cap Installed
contact the installation
contractor.
15 Sockets in
12-ft Case
10 Sockets in
8-ft Case
X-15
X-14
X-12
X-13
X-11
X-9
X-10
X-8
X-6
X-7
X-5
X-3
X-4
X-2
X-1
Always work Left to Right,
and Bottom to Top
If a shelf is plugged in and the lamp does
not work, verify:
"ON"
P/N 0432812
June, 2001