The DD-S2 is designed for a fast and toolless installation. This manual is written to help you install and operate your DD-S2 dendrometer with least difficulty and for desirable results. Please read it carefully before installing the sensor, and refer to it if you should have any difficulty with the sensor in the future.
Diameter Dendrometer Small - Type DD-S2 3. Safety Information The sensor is protected from rain water, but it is not waterproof. Please do not immerse the sensor in water, or install the sensor below a longer lasting snow cover. Avoid any tension between the cable and sensor during handling and operation.
Page 4
Diameter Dendrometer Small - Type DD-S2 5. Wiring and Logger Configuration The dendrometer is compatible with most data loggers. In the following we exemplify the connection with Dendrometer Logger (DL18) and Campbell Logger (CR1000). Please contact us if your logger is not described here, or if you should need further assistance.
5 mm. At frosts the stem diameter can shrink consid- erably. 7. Technical Specifications Name of the Sensor Diameter dendrometer small Type DD-S2, fast mounting frame for toolless installation Use area For measuring diameter growth of plants Suitable for plant Diameter 0-5 cm (>5 cm on request) size Suitable for small plants such as trees, wheat, corn.