Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Netro SPRITE
Summary of Contents for Netro SPRITE
- Page 2 Contents...
- Page 3 Test the functionality of your irrigation system with your current controller first. If it does not work, please make sure it is repaired before installing the Sprite. Note: If you are not sure about the condition of your sprinkler system, you might want to check whether there are shorted zones or open zones.
-
Page 4: Installation
Sprite will be installed. We recommend a signal of at least 2 bars on your phone. Note: Sprite is unable to connect to Wireless-B(11Mbps) routers. Sprite only supports the newer standards, namely Wireless-N, Wireless-G and Wireless-AC. Sprite is incompatible with Wi-Fi networks secured by WEP. - Page 5 Wiring Reconnect the wires to the slots on the base. Tips: 1. Use the picture of the wires on your old controller to help you remember. 2. The slot named "M" is for the master valve. In some controllers it is named as "PMV"...
- Page 6 Wiring (INTERNALLY CONNECTED) 24VAC Power adapter ··· Master valve ··· Valve 1 Valve 2 Valve 3 Valve 10 Valve 11 Valve 12...
- Page 7 (once every second). If the light is stable or blinking fast (twice every second), press the RST button. The network of your Sprite will be in its HOST mode (you will see a WiFi network named “Netro_IRC_xxx"). Download the free Netro app and start to configure.
-
Page 8: Troubleshooting
During the Wi-Fi setup, after I input the password, Sprite starts to blink quickly. That means Sprite has connected to your router but it has no access to the internet. It will disconnect from your router and change back to its host mode in a few seconds. - Page 9 The light on Sprite is blinking fast (twice per second). If your app shows the device is offline, your Sprite is unable to connected to your home WiFi (possible causes: 1. your router is down; 2. Wi-Fi signal is weak;...
- Page 10 Sprite to your home Wi-Fi, then you can use the 'remote control' feature on the Netro app to turn on and off the zones instantly. If you just moved into a house and possibly have not installed the router, the "Test run"...
- Page 11 Will Sprite re-connect to the Wi-Fi automatically after a power outage? Sprite will re-connect to the Wi-Fi automatically after a power outage. Also, all the zone settings and watering schedules are saved on the cloud server, so you will not lose anything.
-
Page 12: Mechanical Specifications
Specifications Mechanical Specifications Dimensions 5.7X5.7X1.2 (1nches) Weight 8.2 oz / 230 g Output 12 zones + 1 master valve Electrical Specifications AC Input 24VAC, 50 / 60 Hz, 800 mA Valve output 24 VAC, 50 / 60 Hz, max 10VA Master valve 24 VAC, 50 / 60 Hz, max 10VA 802.11N, 2.4Ghz, US / Japan / EU... -
Page 13: Limited Warranty
Limited Warranty Netro Inc., Portland, Oregon USA, warrants to the owner of the enclosed product that the product contained in the box will be free from defects in materials and workmanship for a period of two (2) years from the date of delivery following the original retail purchase.
Need help?
Do you have a question about the SPRITE and is the answer not in the manual?
Questions and answers