Advertisement
Quick Links
Advertisement
Related Manuals for Netro SPRITE
Summary of Contents for Netro SPRITE
- Page 4 Contents...
- Page 5 Test the functionality of your irrigation system with your current controller first. If it does not work, please make sure it is repaired before installing the Sprite. Note: If you are not sure about the condition of your sprinkler system, you might want to check whether there are shorted zones or open zones.
-
Page 6: Installation
Sprite will be installed.We recommend a signal of at least 2 bars on your phone. Note: Sprite is unable to connect to Wireless-B(11Mbps) routers. Sprite only supports the newer standards, namely Wireless-N,Wireless-G and Wireless-AC. Sprite is incompatible with 5 GHz Wi-Fi networks. - Page 7 Wiring...
- Page 8 Wiring...
- Page 9 Setup...
-
Page 10: Weather Data
- Change providers By default, your Sprite is connected to DarkSky for weather data. You can change it to a different weather source in the Netro app -> Settings -> Controller -> Weather Provider. - Page 11 Smart Zone Your Sprite optimizes the watering schedules based on weather conditions and watering regulations. You can select the Smart level for each zone in the Netro app -> Settings -> Zones -> Smart Zone. - Advanced: Your Sprite automatically creates smart watering schedules based on moisture level and watering regulations.
- Page 12 The LED Light The Reset Button...
-
Page 13: Troubleshooting
Troubleshooting... - Page 14 Troubleshooting...
- Page 16 6(12)
-
Page 17: Specifications
Specifications... -
Page 18: Limited Warranty
Support support@netrohome.com FCC Compliance Notice and other legal information: visit netrohome.com Limited Warranty Return Policy...
Need help?
Do you have a question about the SPRITE and is the answer not in the manual?
Questions and answers