K II Enterprises PET-AGREE Instructions
Hide thumbs Also See for PET-AGREE:

Advertisement

1. Point the PET-AGREE toward the pet from a distance of about 5 feet
up to 20 feet away.
2. Press the button for 1 or 2 seconds while giving the desired verbal
command.
3. Repeat as necessary until the pet responds to your command as
desired.
Training: The PET-AGREE can help emphasize verbal commands to
sit, heel, stay, come, quiet, stay down or any other trained response for
your pet. PET-AGREE may also be used as the signal for a trained
response such as calling back your dog from a long distance.
Behavior Modification: The PET-AGREE can reinforce corrective
commands to keep a pet off the furniture, stop jumping up on people,
stop excessive barking or caterwauling, stay out an area or stop
clawing, biting, scratching and chewing.
Protection: The PET-AGREE can also be used to keep stray or
unleashed dogs from approaching.
1. Point the PET-AGREE toward the aggressive, approaching animal
2. Press the button and activate PET-AGREE for 1 to 2 seconds
3. Repeat as necessary to repel or stop the animal
- Always use positive reinforcement techniques when training with the
PET-AGREE.
- Best results are obtained when the PET-AGREE is pointed in the
direction of the pet being trained.
- Some pets respond instantly, while others may require more time. Be
consistent and repetitive.
- As a pet's response to commands improves the PET-AGREE may be
required less frequently.
- Effectiveness may vary due to each pet's age, temperament, and
hearing ability. Deaf pets will not respond.
The PET-AGREE is a hand held device to
assist in training and conditioning a pet dog or
cat. The PET-AGREE emits a harmless,
humane high frequency sound, clearly audible
to dogs and cats but barely perceptible to
humans. This sound helps emphasize verbal
commands to improve a pets response or can
be used as a stimulus alone to initiate a
conditioned response or interrupt improper
behavior. The PET-AGREE alone does not
induce proper behavior and the best results
occur when used in conjunction with proper,
proven, effective training techniques.
INSTRUCTIONS

USES

HELPFUL HINTS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PET-AGREE and is the answer not in the manual?

Questions and answers

Summary of Contents for K II Enterprises PET-AGREE

  • Page 1 INSTRUCTIONS 1. Point the PET-AGREE toward the pet from a distance of about 5 feet up to 20 feet away. 2. Press the button for 1 or 2 seconds while giving the desired verbal command.
  • Page 2 In no event will K II Enterprises or its dealers or suppliers be liable to the user for any damages arising out of the use or inability to use this product.

Table of Contents