First Steps; Adapt Power Supply; Connect Devices - TAXON TOOLS Scart Switch Manual

2) First steps

2.1) Adapt Power Supply

Step 1:
Press the button as shown below and turn the plug clockwise to unlock it. Then you can remove it.
Step 2:
Select the desired country-specific plug.
Step 3:
Insert the desired country-specific plug and turn it counterclockwise until it clicks into place.

2.2) Connect devices

Connect the game consoles or other video equipment to the Taxon Scart Switch. If a device should have a
higher priority, it should be connected to inputs with higher numbers.
Example: You have a PS2, an XBox and a NES. If the NES is turned on, the signal should always be displayed
on the output device. As 2nd priority the Xbox should be enabled. To get the desired prioritization, the NES
should be plugged into input 3, the Xbox into input 2 and the PS2 into input 1.
Connect the Scart and/or RCA output to the output devices. Then power the Taxon Scart Switch with the
supplied power adapter. Turn on your output devices and then turn on the device at the desired input. The
Taxon Scart Switch should now automatically display the switched-on input device at the output device if
the AV channel is activated. For best quality we recommend using the official Scart cable to connect to the
output device.