Yamaha Tenere 700 Owner's Manual page 25

WARNING
Always ride on paved roads with the
ABS turned on. Turn the ABS off only
when riding on non-paved surfaces.
Multi-function display
1
1. Multi-function display
The multi-function display is equipped
with the following:
 an odometer (ODO)
 two tripmeters (TRIP 1 and TRIP 2)
 a countdown tripmeter (TRIP CD)
 a fuel reserve tripmeter (TRIP F)
 an instantaneous fuel consump-
tion display (km/L, L/100 km, or
MPG)
 an average fuel consumption dis-
EWA21100
play (AVE_ _._ km/L, AVE_ _._
L/100 km, or AVE_ _ _._ MPG)
 a coolant temperature display
 an air temperature display (Air)
 a brightness control mode
Push the top set button to change the
EAU90750
display in the following order:
ODO → TRIP 1 → TRIP 2 → TRIP CD
→ TRIP F → km/L, L/100 km or MPG
→ AVE_ _._ km/L, AVE_ _._ L/100 km
or AVE_ _ _._ MPG → AVE_ _._ km/h or
AVE_ _._ MPH → _ _ °F → Air_ _ °F →
ODO
TIP
 The fuel reserve tripmeter appears
only when you are low on fuel.
 Push the bottom set button to
switch the display in the reverse
order.
Odometer
The odometer shows the total distance
traveled by the vehicle.
Instrument and control functions
TIP
The odometer will lock at 999999 and
cannot be reset.
Tripmeters
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, select it by push-
ing the top set button, and while the
digits flash, push the bottom set button
until it is reset.
TIP
The tripmeters will reset and continue
counting after 9999.9 is reached.
Countdown tripmeter settings
To set the countdown tripmeter, select
it by pushing the top set button. When
the digits stop flashing, push the top
and bottom set buttons simultaneously
until the first digit starts flashing. A
EAU86890
short press on the top set button will
increase the number from "0" to "9".
Push the bottom set button to select
the next digit and set it following the
same procedure as the first digit. Push
4-7
EAU90760
4
EAU90721