Advertisement
Assembly Instructions
MODEL #TC80485
Floor Lamp Assembly
1.
Carefully unpack and lay out the parts as shown in the illustration.
2.
Pull cord through base to tighten column connections.
3.
Screw lower column into lamp base.
4.
Screw second column into lower column.
5.
Screw third column into second column.
6.
Screw upper column into third column.
7.
Screw shade holder into Upper Column.
8.
Pull balance of cord from base to tighten excess.
9.
Unscrew the shade ring from the socket,
place shade into the shade holder.
10.
Replace the shade Ring onto threaded socket to secure the shade.
Uses Maximum 100Watt Type "A" Bulb.
(Bulb not included)
Unplug lamp, wipe with a damp cloth. Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
Revision – 10/05/16
vt
Advertisement
Table of Contents
Related Manuals for Springdale Lighting TC80485
Summary of Contents for Springdale Lighting TC80485
- Page 1 Assembly Instructions FOR RETURN SHIPPING PURPOSES: MODEL #TC80485 PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Floor Lamp Assembly Carefully unpack and lay out the parts as shown in the illustration. Pull cord through base to tighten column connections. Screw lower column into lamp base.
- Page 2 ASSEMBLY INSTRUCTIONS: FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL PACKAGING Item No.: TC80485 TO MINIMIZE DAMAGE. Table Lamp Assembly 1. Place the lamp on a level surface. Finial 2. Insert the Harp into the saddle until it sits firmly into the Shade saddle.
Need help?
Do you have a question about the TC80485 and is the answer not in the manual?
Questions and answers