Trouble Shooting; Symptoms Or Errors; Solution - H3 Falcon 4010 User Manual

11. Trouble Shooting

Symptoms or Errors

When PCI out of resource and the following warning messages may appear during POST and the server halts:
· PCI out of resource
· PCI resource error
· Insufficient PCI resources detected
· There is not enough available PCI memory

Solution

Disconnect Falcon 4010 from the host
Go to the host BIOS → Advanced settings
Enable 4G decoding
Set MMIO High Size to 512G or higher
Specific example: SuperMicro Server
1. Temporarily remove the connection of GPU expansion chassis (unplug connected cable)
2. Go to the BIOS Advanced
a. Advanced->PCIe/PCI/PnP configuration-> Above 4G Decoding to Enabled
b. Advanced->PCIe/PCI/PnP Configuration->MMIOHBase to 56T
c. Advanced->PCIe/PCI/PnP Configuration->MMIO High Size to 512G or higher
3. Connect the GPU expansion chassis to the server and see if the server boots properly
Specific example: Intel Xeon Phi Server
1. Temporarily remove the connection of GPU expansion chassis (unplug connected cable)
46