Table of Contents
Advertisement
Go to Falcon 4010 GUI → Maintenance page
Click "Upload/Install"
Upload the firmware .img file. The confirmation message will pop-up, click "Yes" to proceed.
When the update completes, the notification message will pop-up, click "Close" to end
Now reboot Falcon 4010, the new firmware will be installed.
Note:
The system will automatically detect which firmware file is uploaded
(BMC, PCIe switch 1, or PCIe switch 2)
Firmware for PCIe switch 1 and 2 are not the same.
25
Advertisement
Table of Contents
