Advertisement
Step 01
1. Place Main Frame (1) upright on the ground.
2. Attach Rear Base (2), Arc Splint (9) to Main Frame (1) with two M12*105
bolts (28), four Arc Washers (35) and two M12 Lock Nuts (38).
Step 02
1. Attach Pull Pin (21) to Joint Tube (4).
2. Attach Joint Tube (4) to Main Frame (1) with one M12*115 Bolt (29), two
Washers (36), and one M12 Lock Nut (38).
Screw Bolt M10*20 into the middle back of Joint Tube (4). (*please see
exploded view for specific spot.)
3. Slide Seat Adjustment (39) into Joint Tube (4).
Step 03
1. Attach Seat Cushion (32) to Seat Support (3) with four M8*25 Bolts (24), and
four Washers (34).
2. Attach Seat Support (3) to Joint Tube (4) with one M12*150 Bolt (30), two
Washers (36), and one M12 Lock Nut (38). (*Keep screw loose.)
Step 04
1. Attach Foam Roller with Cover (17) and Foam Cap (10) to Leg Extension (8)
with two M8*25 Socket Head Screws (22).
2. Attach Leg Extension (8) to Seat Support (3) with two M12*150 Bolts (30),
four Washers (36) and two M12 Lock Nuts (38).
Advertisement
