Table of Contents
Advertisement
1. Introduction
This is an image processing unit that improves the visibility of objects by clarifying video images at
low contrast. Images whose visibility has lowered due to various factors such as low illuminance,
backlight, and fogs are optimized easy on human eyes. Our original real time image clarifying
technology "ForteVision" is introduced into the image clarifying processing. The built-in contrast
improvement processing and Gaussian noise filter processing have improved contrast and reduced
noise at low illuminance. The adopted video signal covers HD-SDI and can be easily built into the
existing video transmission system.
Since image clarifying processing is executed automatically, it is not necessary to change the setting
of each parameter even when external light condition has changed.
Normally, no adjustment is necessary for the improvement level, but the image clarifying processing
strength level can be switched over in 3 steps. (However, note that noise and contour may become
obvious if the image clarifying processing strength level is raised).
The range adjustment function is also incorporated to process the video signal whose range is
compressed.
All the operations other than power ON of this unit is done by the attached USB control software only.
2. Basic Specifications
Item
Input video signal
Input signal format
Input signal terminal
Output video signal
Output signal format
Output signal terminal
Pass-through function
Image clarifying processing
strength adjustment
Range adjustment
Brightness adjustment
Audio signal
Remote control
Control unit connector
Power supply voltage
Power consumption
Environmental conditions
Mass
Outside dimensions
*Adjustment value can be changed by the USB control software.
3. Configurations
• Unit (main body) × 1 pc
• USB cable × 1
• CD (USB control software and instruction manual included.) × 1 pc
HD-SDl
Full HD digital (1920 × 1080 60 i)
BNC connector 75 Ω
HD-SDl
Full HD digital (1920 × 1080 60 i)
BNC connector 75 Ω
Input video is output as is when the unit is powered OFF.
3-step switchover of OFF / Normal / Enhance
3-step switchover of Full / Limited / Custom
3-step switchover of Low / Middle / High
Not adaptable
USB
USB-B connector
100 - 240 V +-10% AC 50 / 60 Hz (attached AC adapter)
5 W
Temperature: 0 ºC - 50 ºC (32 ºF - 122 ºF)
Humidity: 20 % - 80 % (with no dew deposition)
1.3 kg (with AC adapter excluded)
205 mm (W) × 143 mm (D) × 44 mm (H) (Projections excluded.)
• AC adapter × 1 pc
• Instruction manual(this paper) × 1
1
Specifications
Advertisement
Table of Contents
