Table of Contents
Advertisement
6. Troubleshooting
Trouble
The power plug is off the outlet. Firmly insert the AC adapter to the outlet.
The unit does
The power connector is
not power ON.
disconnected.
BNC connector is disconnected. Firmly insert the connector to this unit.
Image does
not appear.
There is no input signal.
Setting is at "FV OFF".
Clarifying
does not work.
Much noise is in the input video. Adjust setting items and enter the settings.
Clarifying
Input image is a natural image in
does not work
daylight.
or image is
not seemed to
be clarified.
* Contact our office if a trouble cannot be corrected even after the remedies above are taken
or other additional trouble has been generated.
Bottom
MODEL
FV-XXXXXX
S/N
SXXXXXXXXXXX
ID
XXXXXXXX
Serial No.
(1) This unit, this material, and the attached software are copyrighted by ZENIC Inc.
(2) The contents described in this material neither guarantees the execution of the industrial
property rights and other rights nor permits its license.
(3) The specifications of this unit may be changed without prior notice for the improvement
of its performance. The contents in this material may also be revised according to the
specification change of this unit.
OPTEX Bldg. 8F 4-7-5, Nionohama Otsu SHIGA, 520-0801, JAPAN
Possible cause
ZENIC Inc.
URL http://www.zenic.co.jp/ /E-Mail : support@zenic.co.jp
Phone: +81-77-526-2101 / Fax. : +81-77-526-0500
Firmly insert the connector to this unit.
Check the input device.
Confirm the setting, set to "FV ON".
As for a good natural image in
daylight,even if clarifying is turned on,
drastic changes may not occur and
clarifying just doesn't seem to work(it is
not malfunction).
10
Remedy
Advertisement
Table of Contents
